How to Clean a Truck Mounted Water Well Drilling Rig

Vehicle-mounted water well drilling rigs often accumulate mud, dust, oil and other impurities due to the variable working environment, so regular cleaning is crucial. The following are the steps to clean the truck-mounted water well drilling rig:

1. Shutdown and Cooling

Before cleaning, make sure the rig is completely shut down and the diesel or electric motor has cooled to a safe temperature.

2. Clean up external dust and mud build up

Using a high pressure water or air gun: Clean mud, dust and debris from the outside of the rig, the body, fuel lines, hydraulic system, mud pipes and other surfaces.

3. Clean drilling tools and drill pipes

Clean drill bits, drill pipes and tools:

Check the wear of drilling tools and replace them if damaged.

Check the joints of drilling tools: Make sure that there is no looseness or corrosion on the joints of drill pipes and drilling tools to avoid the risk of jamming or breakage in the next operation.

4. Clean the hydraulic system

Check the hydraulic oil: Check the level and quality of the hydraulic oil regularly and replace it when necessary.

Clean the hydraulic piping: check the piping of the hydraulic system for leakage or dirt, clean and replace the filters if necessary.

5. Clean the power system

Clean the engine and motor: Clean the engine surface and radiator to ensure smooth air flow and prevent overheating.

Use a brush or air gun to remove dust buildup around the engine.

CHECK FUEL SYSTEM: Clean fuel lines and filters to ensure that the fuel system is clean and to prevent contaminants from entering the engine.

Summarize

Cleaning of vehicle-mounted water well drilling rigs should be done on a regular basis to ensure that there is no buildup of dirt on its key components, thus ensuring the smooth operation of the equipment. Regular cleaning not only reduces breakdowns, but also extends the life of the rig. Timely cleaning after each operation is the key to keeping the equipment running efficiently.

If you don't know how to pick the right vehicle-mounted water well drilling rig, click the link below to contact our professional team directly.

Comments

How to extend the life of drill pipe

1. When using a new drill pipe, the drilling rig manufacturer should make sure that the wire fasteners on the front cut-off (protecting the shaft head) of the drill bit are also close to the new one. A ring-buckled rotating head can easily damage the wire fasteners of the new drill pipe, resulting in leaks, snaps, and loosening, and so on. 2. In the use of drill pipe for a drilling, should be first “grinding new buckle”, which consists of, first smeared with silk buckle oil, and then use the drill rig full torque, and then open the buckle, and then smeared with silk buckle oil and then open, and so on for three times, you can avoid the new wear and buckle. 3. As far as possible to maintain the drill pipe under the ground and on the ground in a straight line, so as to avoid part of the side of the wire buckle force and cause unwanted wear and tear, or even jump buckle, pay attention to the rig anchored to avoid the construction of the force to move is very important. 4. The buckle...

What are the Basic Maintenance Methods for Water Well Drilling Rigs

Cleaning: After every day's operation, clean the mud, oil, and other debris on the rig in time to keep the rig clean. Checking lubrication: regularly check the lubrication points to ensure that the lubricant is sufficient and the grease is clean. Fasteners check: you can check whether the bolts and nuts of each part are loose and tighten them in time. Hydraulic system checks: you can check whether the hydraulic oil level is normal, whether there is no leakage phenomenon, and whether the hydraulic oil is clean. Lubrication system maintenance: regular replacement of lubricating oil, grease, cleaning oil filter, and oil tank. Hydraulic system maintenance: regular replacement of hydraulic oil, cleaning hydraulic filter. Cooling system maintenance: clean the radiator, and check the coolant level. Transmission system maintenance: check the tightness of the transmission belt, and replace the worn transmission belt. Electrical system maintenance: check whether the line is firm...

Use and maintenance of drill bits

Use and maintenance of drill bits: 1. Choose a suitable drill bit: Before using a drill bit, it is necessary to select the appropriate type and specification of drill bit based on drilling conditions and needs. 2. Installing the drill bit: When installing the drill bit, it is necessary to ensure that the connection between the drill bit and the drill pipe is firm, and to correctly install the cutting teeth of the drill bit. 3. Maintain appropriate drilling speed and pressure during the drilling process: Excessive drilling speed and pressure can lead to premature wear and damage of the drill bit, while too small can affect drilling efficiency. 4. Regular inspection and maintenance: Regularly check the wear of the drill bit and replace severely worn components in a timely manner. At the same time, it is necessary to regularly clean and lubricate the drill bit to extend its service life. 5. Storage and preservation: When storing and preserving drill bits, it i...

Pearldrill Drilling Rig And Drill bits

Search This Blog