What are the maintenance options for water well drilling rigs

Maintenance of water well drilling rigs is critical to extend their life and maintain performance. The following are the main maintenance measures for water well drilling rigs:

1. Daily maintenance
Clean the equipment: clean the mud, dust and debris on the rig after daily use, especially the lubrication part, to prevent impurities from affecting the operation of the rig.
Check the hydraulic system: check the level and quality of the hydraulic oil and make sure that the oil tank is well sealed. Replace the hydraulic oil regularly to prevent oil contamination.
Check the electrical system: keep the connectors and cables of the electrical system intact to prevent aging or loosening.
Tighten the bolts: check whether the bolts and nuts of each part are loose, especially the parts with high vibration, tighten them in time.
2. Lubrication maintenance
Regular lubrication: Lubricate the rotating shaft, gears, chains, drilling rod joints, etc. regularly according to the requirements of the equipment manual.
Lubricating grease: choose appropriate lubricating grease, according to the temperature and humidity of the using environment, ensure the lubricating effect of each active part.
3. Maintenance of drill pipe and drill bit
Cleaning and inspection: Drill pipes and drill bits should be cleaned up after use to avoid accumulation of mud and other debris.
Checking wear and tear: Regularly check the wear and tear of the drill bit, and replace it in time when it is seriously worn. Any damage to the connection part of the drill pipe should be repaired immediately.
Regular rust prevention: anti-rust treatment for drill pipes, especially when not in use for a long time, can be coated with anti-rust oil.

Good routine maintenance and regular maintenance can ensure that the water well drilling rig stays in good condition when in use and prolong the service life of the equipment.

If you don't know how to choose the right water well drilling rig, click the link below to contact our professional team directly.
Contact us

Comments

How to extend the life of drill pipe

1. When using a new drill pipe, the drilling rig manufacturer should make sure that the wire fasteners on the front cut-off (protecting the shaft head) of the drill bit are also close to the new one. A ring-buckled rotating head can easily damage the wire fasteners of the new drill pipe, resulting in leaks, snaps, and loosening, and so on. 2. In the use of drill pipe for a drilling, should be first “grinding new buckle”, which consists of, first smeared with silk buckle oil, and then use the drill rig full torque, and then open the buckle, and then smeared with silk buckle oil and then open, and so on for three times, you can avoid the new wear and buckle. 3. As far as possible to maintain the drill pipe under the ground and on the ground in a straight line, so as to avoid part of the side of the wire buckle force and cause unwanted wear and tear, or even jump buckle, pay attention to the rig anchored to avoid the construction of the force to move is very important. 4. The buckle...

What are the Basic Maintenance Methods for Water Well Drilling Rigs

Cleaning: After every day's operation, clean the mud, oil, and other debris on the rig in time to keep the rig clean. Checking lubrication: regularly check the lubrication points to ensure that the lubricant is sufficient and the grease is clean. Fasteners check: you can check whether the bolts and nuts of each part are loose and tighten them in time. Hydraulic system checks: you can check whether the hydraulic oil level is normal, whether there is no leakage phenomenon, and whether the hydraulic oil is clean. Lubrication system maintenance: regular replacement of lubricating oil, grease, cleaning oil filter, and oil tank. Hydraulic system maintenance: regular replacement of hydraulic oil, cleaning hydraulic filter. Cooling system maintenance: clean the radiator, and check the coolant level. Transmission system maintenance: check the tightness of the transmission belt, and replace the worn transmission belt. Electrical system maintenance: check whether the line is firm...

Use and maintenance of drill bits

Use and maintenance of drill bits: 1. Choose a suitable drill bit: Before using a drill bit, it is necessary to select the appropriate type and specification of drill bit based on drilling conditions and needs. 2. Installing the drill bit: When installing the drill bit, it is necessary to ensure that the connection between the drill bit and the drill pipe is firm, and to correctly install the cutting teeth of the drill bit. 3. Maintain appropriate drilling speed and pressure during the drilling process: Excessive drilling speed and pressure can lead to premature wear and damage of the drill bit, while too small can affect drilling efficiency. 4. Regular inspection and maintenance: Regularly check the wear of the drill bit and replace severely worn components in a timely manner. At the same time, it is necessary to regularly clean and lubricate the drill bit to extend its service life. 5. Storage and preservation: When storing and preserving drill bits, it i...

Pearldrill Drilling Rig And Drill bits

Search This Blog