What are the operator specifications for water well drilling rigs

Water well drilling rig operators to master just far more than the following nine points, the following content only selected key points for our reference, water well drilling rig, we should pay attention to safety in the operation, to avoid accidents, resulting in adverse consequences.

1、Water well drilling rig operation must be completed by personnel who are physically healthy and have the appropriate knowledge and operating license.

2、Water well drilling rig shall not be operated without care.

3、When the water well drilling rig does not use the hydraulic system, the water well drilling rig construction, the water well drilling rig screwing machine switching valve should be placed in the “oil pump unloading” position.

4、When you pull the speed change handle, you must cut off the clutch first, and then change the gear after the gear stops rotating, so as not to break the gear, and pay attention to fix the handle well.

5、When closing the clutch, it should be operated smoothly, and it is forbidden to open and close the clutch violently to avoid the clutch being in half-engaged state.

6、Water well drilling rig move to the front limit position, tighten the front and rear pressure plate lock nut, and water well drilling rig price, before allowing drilling or lifting.

7、After the chuck suddenly loses pressure due to accidents (such as loss of power, oil pump not working, or other mechanical hydraulic accidents, etc.), the drilling rods or drilling tools should be stuck in time.

8、Operation should always pay attention to the working condition of each pressure gauge, if there is any abnormality, it should be dealt with in time.

9、Often pay attention to whether there is any abnormal ringing or high temperature in each moving part; any problem found should be dealt with immediately.

Comments

How to extend the life of drill pipe

1. When using a new drill pipe, the drilling rig manufacturer should make sure that the wire fasteners on the front cut-off (protecting the shaft head) of the drill bit are also close to the new one. A ring-buckled rotating head can easily damage the wire fasteners of the new drill pipe, resulting in leaks, snaps, and loosening, and so on. 2. In the use of drill pipe for a drilling, should be first “grinding new buckle”, which consists of, first smeared with silk buckle oil, and then use the drill rig full torque, and then open the buckle, and then smeared with silk buckle oil and then open, and so on for three times, you can avoid the new wear and buckle. 3. As far as possible to maintain the drill pipe under the ground and on the ground in a straight line, so as to avoid part of the side of the wire buckle force and cause unwanted wear and tear, or even jump buckle, pay attention to the rig anchored to avoid the construction of the force to move is very important. 4. The buckle...

What are the Basic Maintenance Methods for Water Well Drilling Rigs

Cleaning: After every day's operation, clean the mud, oil, and other debris on the rig in time to keep the rig clean. Checking lubrication: regularly check the lubrication points to ensure that the lubricant is sufficient and the grease is clean. Fasteners check: you can check whether the bolts and nuts of each part are loose and tighten them in time. Hydraulic system checks: you can check whether the hydraulic oil level is normal, whether there is no leakage phenomenon, and whether the hydraulic oil is clean. Lubrication system maintenance: regular replacement of lubricating oil, grease, cleaning oil filter, and oil tank. Hydraulic system maintenance: regular replacement of hydraulic oil, cleaning hydraulic filter. Cooling system maintenance: clean the radiator, and check the coolant level. Transmission system maintenance: check the tightness of the transmission belt, and replace the worn transmission belt. Electrical system maintenance: check whether the line is firm...

Use and maintenance of drill bits

Use and maintenance of drill bits: 1. Choose a suitable drill bit: Before using a drill bit, it is necessary to select the appropriate type and specification of drill bit based on drilling conditions and needs. 2. Installing the drill bit: When installing the drill bit, it is necessary to ensure that the connection between the drill bit and the drill pipe is firm, and to correctly install the cutting teeth of the drill bit. 3. Maintain appropriate drilling speed and pressure during the drilling process: Excessive drilling speed and pressure can lead to premature wear and damage of the drill bit, while too small can affect drilling efficiency. 4. Regular inspection and maintenance: Regularly check the wear of the drill bit and replace severely worn components in a timely manner. At the same time, it is necessary to regularly clean and lubricate the drill bit to extend its service life. 5. Storage and preservation: When storing and preserving drill bits, it i...

Pearldrill Drilling Rig And Drill bits

Search This Blog