Routine maintenance content of water well drilling rigs
Lubrication maintenanceRegularly check the lubrication of the key parts of the drilling rig (such as the transmission system, winch, drilling rod joints, etc.), and add lubricating oil or grease in time.
Fastening inspection
Check whether the bolts, nuts, drilling rod joints, etc. are loose, and tighten them in time to prevent loosening leading to failure.
Mud system cleaning
Check whether the mud pump, pipeline and strainer are clogged, clean up the deposits to ensure smooth mud.
Hydraulic system maintenance
Check whether the hydraulic oil level is normal, observe whether the hydraulic pipeline is leaking, and replace the hydraulic oil or damaged seals if necessary.
Power system check
Regularly check the operation status of diesel engine or electric motor, clean the air filter, check the oil and coolant level, and replace the oil and filter element on time.
Electrical system maintenance
Check whether the wiring, switches and control panel are normal, clean the dust of the electrical parts to prevent short circuit or poor contact.
Drilling Tools Inspection
Check the wear and tear of the drill bit and drill pipe, replace the parts with serious wear and tear in time to prevent the drill tool from breaking.
Cooling system check
Ensure that the mud or airflow cooling system is smooth to avoid overheating of the drill bit affecting the working efficiency.
Equipment cleaning
Clean the surface and internal mud and dust of the drilling rig after each operation to keep the equipment clean and prolong its service life.
Regular test run
When not in operation, start the drilling rig regularly to check the operation of the various systems of the equipment, to prevent the aging or failure of components due to long-term suspension.
Summarize: routine maintenance includes lubrication, fastening, cleaning and system checking to ensure efficient and safe operation of water well drilling rig and prolong service life.
Contact us
Comments
Post a Comment