How to extend the service life of water well drilling rig

Extending the service life of a water well drilling rig requires a number of aspects, including daily operation, maintenance, and reasonable use. Here are some key recommendations:

Strictly follow the operating procedures: Familiarize yourself with and comply with the manual and operating procedures of the drilling rig, and avoid illegal operation, such as overloading and forced starting.

Control drilling parameters: According to the geological conditions and the performance of the drilling rig, reasonably control the drilling speed, drilling pressure, pumping volume and other parameters to avoid overload or underload operation.

Lubrication: Regularly check and replace the lubricating oil and grease, etc., to ensure that all parts are adequately lubricated and reduce friction and wear.

Cleaning: Clean the drilling rig regularly, remove soil, dust, oil and so on, keep the machine clean, prevent corrosion and clogging.

Inspection of wearing parts: Regularly inspect the wear and tear of wearing parts such as drill bits, drill pipes, drill collars, pumps, etc., and replace the parts with serious wear and tear in time to avoid causing more damage.

Maintenance of cooling system: Regularly check the water pump, water pipe and radiator of the cooling system to ensure that the cooling system works properly and prevent the engine from overheating.

Electrical system check: Regularly check the electrical lines, switches, meters, etc., to ensure that the electrical system works properly and prevent short circuit and leakage.

Select drill bit according to geological conditions: Different geological conditions require different types of drill bits, such as tooth wheel drill bit, PDC drill bit, diamond drill bit and so on.

Transportation: When transporting the drilling rig, necessary fixing measures should be taken to prevent collision and damage during transportation.

Through the above measures, the service life of the water well drilling rig can be effectively extended, the maintenance cost can be reduced and the working efficiency can be improved.

If you need to buy the right water well drilling rig, click the link below to contact our professional team.

Contact us

Comments

How to extend the life of drill pipe

1. When using a new drill pipe, the drilling rig manufacturer should make sure that the wire fasteners on the front cut-off (protecting the shaft head) of the drill bit are also close to the new one. A ring-buckled rotating head can easily damage the wire fasteners of the new drill pipe, resulting in leaks, snaps, and loosening, and so on. 2. In the use of drill pipe for a drilling, should be first “grinding new buckle”, which consists of, first smeared with silk buckle oil, and then use the drill rig full torque, and then open the buckle, and then smeared with silk buckle oil and then open, and so on for three times, you can avoid the new wear and buckle. 3. As far as possible to maintain the drill pipe under the ground and on the ground in a straight line, so as to avoid part of the side of the wire buckle force and cause unwanted wear and tear, or even jump buckle, pay attention to the rig anchored to avoid the construction of the force to move is very important. 4. The buckle...

What are the Basic Maintenance Methods for Water Well Drilling Rigs

Cleaning: After every day's operation, clean the mud, oil, and other debris on the rig in time to keep the rig clean. Checking lubrication: regularly check the lubrication points to ensure that the lubricant is sufficient and the grease is clean. Fasteners check: you can check whether the bolts and nuts of each part are loose and tighten them in time. Hydraulic system checks: you can check whether the hydraulic oil level is normal, whether there is no leakage phenomenon, and whether the hydraulic oil is clean. Lubrication system maintenance: regular replacement of lubricating oil, grease, cleaning oil filter, and oil tank. Hydraulic system maintenance: regular replacement of hydraulic oil, cleaning hydraulic filter. Cooling system maintenance: clean the radiator, and check the coolant level. Transmission system maintenance: check the tightness of the transmission belt, and replace the worn transmission belt. Electrical system maintenance: check whether the line is firm...

Use and maintenance of drill bits

Use and maintenance of drill bits: 1. Choose a suitable drill bit: Before using a drill bit, it is necessary to select the appropriate type and specification of drill bit based on drilling conditions and needs. 2. Installing the drill bit: When installing the drill bit, it is necessary to ensure that the connection between the drill bit and the drill pipe is firm, and to correctly install the cutting teeth of the drill bit. 3. Maintain appropriate drilling speed and pressure during the drilling process: Excessive drilling speed and pressure can lead to premature wear and damage of the drill bit, while too small can affect drilling efficiency. 4. Regular inspection and maintenance: Regularly check the wear of the drill bit and replace severely worn components in a timely manner. At the same time, it is necessary to regularly clean and lubricate the drill bit to extend its service life. 5. Storage and preservation: When storing and preserving drill bits, it i...

Pearldrill Drilling Rig And Drill bits

Search This Blog